Sinar View Camera Manual



Bellows

Sinar p-slr for SLR cameras. If you want to make use of the advantages of a Sinar view camera with your digital SLR from Canon or Nikon the Sinar p-slr kit is what you need. This setup lets you obtain precise control over perspective and selective sharpness for great shots in the studio or on location. Sinar large format instruction manual. SINAR large format Posted 7-21-'07 to 12-2-'12. The next page contains information on this camera. Sinar camera PDF MANUAL.


MULTIPURPOSE BELLOWS 4x5″/10x12.5 cm 454.11
Camera bellows for the 4x5″/10x12.5 cm Sinar f1, f2, x, p2 and e. Used with multi-purpose standards for increasing the bellows extension for all formats and as a light hood for viewing the image on the focusing screen and also as a lens hood.
The snap fit on its frame permits easy attachment to Filter Holders 1 or 2 (547.11 or 547.21 respectively).
Maximum extension is 45 cm (18″).
TAPERED BELLOWS 5x7″/13x18 cm 452.17
For extensions up to 50 cm (20″) with the 5x7″/13x18 cm format. For longer extensions, an aditional Multipurpose Standard 437.61 and a Multipurpose Bellows 454.11 are needed. Also serves as a light hood for viewing the image on a 5x7″/13x18 cm focusing screen.

TAPERED BELLOWS 8x10″/20x25 cm 452.58

For extensions up to 65 cm (25²) with the 8x10″/20x25 cm format. Fits on Carrier Frame 433.58 and on 8x10″/20x25 cm Metering Back 462.58. For a further extension from 65 to 90 cm (25 to 35″), an additional Multipurpose Standard 437.61 and a Multipurpose Bellows 454.11 are needed.

SPECIAL BELLOWS 8x10″/20x25 cm to 5x7″/13x18 cm 453.58

For bellows extensions beyond 90 cm (36″) with the 8x10″/20x25 cm format. A 5x7″/13x18 cm Multipurpose Standard and a 5x7″/13x18 cm Tapered Bellows are required as intermediate bellows support.
Additional bellows extensions are possible by adding more multipurpose standards and multipurpose bellows.

WIDE ANGLE BELLOWS 1 4x5″/10x12.5 cm 455.36

For short bellows extensions with the 4x5″/10x12.5 cm format. For use with focal lengths from 75 to 135 mm focused at infinity. Good camera adjustment capability is retained in spite of the short exten-sion.
• Also serves as a hood while viewing an image on the focusing screen, for example with Binocular Magnifier 471.21 and Binocular Light Hood 531.51.

WIDE ANGLE BELLOWS 2 4x5″/10x12.5 cm 455.46

This wide angle bellows is required for 4x5″/10x12.5 cm format photography in conjunction with extreme wide angle lenses (65 mm or shorter), for extreme camera adjustments and for digital photography with CCD array chips.

WIDE ANGLE BELLOWS 5x7″/13x18 cm 455.27

For very short bellows extensions with the 5x7″/13x18 cm format and focal lengths from 90 to 165 mm focused at infinity. Permits good camera adjustments in spite of the short extension.
• Can also be used as a focusing screen viewing hood, for instance with Binocular Magnifier 471.21 and Binocular Light Hood 531.51.

WIDE ANGLE BELLOWS 8x10″/20x15 cm 455.58

For very short bellows extensions with the 8x10″/20x25 cm format and focal lengths from 120 to 240 mm focused at infinity. Fits on Carrier Frame 433.58 and on Metering Back 8x10″/20x25 cm 462.58. Permits good camera adjustments in spite of the short extension.
• Can also be used as a focusing screen viewing hood with the 8x10″/20x25 cm format, for instance with Binocular Magnifier 471.21 and Binocular Light Hood 531.51.

Sinar View Camera Manual Download

PLEASE NOTE: AVAILABILITY MAY BE LIMITED AS MANY ITEMS HAVE BEEN DISCONTINUED!

  • Sinar F1 4x5 View Camera used but is in excellent condition with only very minor signs of ware. Everything works perfectly.The bellows is several years old but has never been used till I put it on for these pictures.
  • Sinar large format instruction manual. SINAR large format Posted 7-21-'07 to 12-2-'12. The next page contains information on this camera. If the image below looks like your camera, click below to see the full manual. Sinar camera PDF MANUAL. CLICK HERE TO CONTINUE TO sinar code PDF booklet.
View
Sinar Photography AG
Industryphotography
HeadquartersZurich, Switzerland
Productslarge format view cameras, lenses, digital backs, RAW Processing Software
Websitewww.sinar.swiss/en

Sinar Photography AG is a Swiss company based in Zurich manufacturing specialized high-resolution view cameras for studio, reproduction, landscape and architecture photography.

Sinar's view-cameras allow both the lens and the film back or sensor back to move in rotation or linearly in any direction (up/down, left/right, front back linearly, and pitch yaw tilt rotations), thus allowing precise image alignment corrections. The cameras are thus often used in advertising, document reproduction, product and architectural photography, where correctly vertical image lines, fine focus accuracy, and extra details are wanted.

The name SINAR is explained by the company itself as 'Still, Industrial, Nature, Architectural and Reproduction photography' in the English version of the April 2011 press release.[1] Other versions of the names were also used, with the S for studio, Sache, or science. In the Indonesian language, 'Sinar' translates into English as 'Light Ray'.

Founding[edit]

The business recalls its roots to Swiss photographer Carl August Koch [de] who worked in Marseille from 1865 to 1878. In 1879 and 1892 Koch also established two family-owned photography studios in Schaffhausen. Koch worked as a portrait, landscape and alpine photographer and was considered one of the first Swiss champions of alpine photography. From 1894 until his death in 1897, Koch was also president of the Swiss Photographers Association. His son Hans-Carl, expanded the family-owned photography studios to include from 1911 photographic retailing. In 1947, the grandson of Koch senior—Carl Hans—a graduate photographer and photographic salesman, took over the family business on the early death of his father Hans-Carl, and founded the following year the Sinar company. Dissatisfied with the limited or imprecise nature of wooden view cameras (e.g. the large Kodak 3 and similar, and the popular Graphlex Graphic Graphlok series) and the limitations of technical (e.g., Linhof Technika) and field cameras of the day he developed a modular camera and received in 1947 a patent for his Sinar camera.[2] His main aims were to produce a large format camera of high precision and simple operation, with a system of parts that were readily interchangeable. The Sinar system's versatility is based on the interchangeability of parts as well as a large number of accessories that have been produced over the years. Major components (rails, bellows, lensboards, and standards) made in the 1940s are still usable with currently manufactured Sinar equipment.

In 1968 Carl Hans' son entered the family business and the company's camera production moved to Feuerthalen (north of Zurich). Sinar moved its base of operations to Zurich after separating from Jenoptik in October 2009.

On November 26, 2013 Leica Camera AG took over Sinar Photography AG.[3]

P-series[edit]

The Sinar P, introduced in 1970, had asymmetric tilts and swings, as opposed to the traditional center or base tilts.[4] This permitted rapid and precise settings without losing sharpness on the axis.

The P series also introduced features such as self-arresting rack and pinion gearing and a precision-engineered quick format change system that allows the photographer to switch between 4x5/5x7/8x10 formats quickly without having to fully disassemble the rear standard. This was accomplished by using a common rear standard bearer and unlocking a single knob to switch among the various format frames. Another new feature implemented in the P series was the Sinar system of calculating swings and tilts as well as the Sinar depth of field calculator. A key feature of the Sinar P system, particularly in the domain of scientific and industrial photography, is the precise machine tolerances that are part of the fittings and movements.

F-series[edit]

The F series was the light-weight version ('F' for 'Field'), offering less refined features than the P series. The difference in weight is significant: the Sinar F 4x5 weighs about 3.3kg and the Sinar P 4x5 weighs about 5.9kg.

The original Sinar F is easily identified by a brushed aluminum monorail and other aluminum accents, while the Sinar F1, F2, and F3 models were made of the same materials, but painted black. The Sinar F also has hard plastic knobs, versus the rubber-coated knobs of the F1 and F2.[5]

The Sinar F and F1 models have a clip-on front standard (lens standard) that does not fully enclose the monorail. The advantage is that this standard can easily be removed from the rail by loosening the clamp and lifting straight up, unlike the rear standard, and it is somewhat lighter weight. The disadvantage of this design is that the rail clamping mechanism is susceptible to breakage if over-tightened.[6] The Sinar F2 and F3 models have a different front standard, which completely encloses the rail and also provides a geared focus adjustment, similar to the rear rail clamp on all Sinar F models. The correct F2 standard can easily be identified as it is a mirror image of the rear standard. The earlier F/F1 front standard has a low-profile metal hinge below the rail.[7]

The F2 and F3 models also came standard with a light-metering back, while this was an option for the F and F1 models.[8] The F3 model is a digital/analog model that supports a variety of Sinar digital lenses and digital backs.[9]

Accessories[edit]

Sinar has manufactured many accessories since its establishment:

A swing-out filter holder that allows the photographer to use a polarizing filter as well as 4x4 inch gel filters.

A 4x5 reflex attachment that employed an adjustable mirror for the best possible viewing of the image. Adapters (now discontinued) were made by Sinar to adapt this viewer to various other view camera makes such as Plaubel, Linhof, and Toyo.

The Zoom series of roll film backs, which allow the use of 120/220 film formats from 6x4.5 to 6x12 formats with excellent film flatness. The earlier versions of the Zoom film backs are usable on any 4x5 camera with an international (Graflok) back (later holders no longer have the Graflok grooves required).[10]

The Sinar LCD shutter system enables their ccd camera backs to have a much extended density range in video mode for focusing capability in a wider range of ambient lighting. This system has been used in modified mode by RIT to obtain multispectral images suited to aging analysis of color pigments in artworks.

Integration of Canon and Nikon SLR cameras as camera backs onto the P standard with adaptors from fellow Swiss camera accessories manufacturer, Foba.

View Camera Wikipedia

Self-cocking shutters, lens-independent, automatic, with built-in apertures.

Film plane metering probes and meters.

Digital backs for the high-end studio environments.

Representative products[edit]

  • Sinar Norma: the original system camera, convertible from 4x5 to 5x7 and 8x10 formats.
  • Sinar P/P2 (Perfection): introduced in 1970, forms the basis for current high-end cameras, convertible from 4x5 to 5x7, 8x10, and P3 formats.
  • Sinar P3: digital, medium format view camera.
  • Sinar F/F+/F1/F2 (Field): lighter and simpler, entry-level, 4x5 and 5x7 (F2) and 8x10 large format film view cameras.
  • Sinar F3: entry-level, digital, medium format view camera.
  • Sinar C/C2 (Combination) System camera that combines a P/P2 style rear standard with a F/F1/F2 style front standard—marketed as a less expensive alternative to the P/P2, but more features than the basic F series.
  • Sinar X: camera that was a stripped-down version of P2 in 4x5 format only.
  • Sinar Alpina/A1: entry level view camera that had a unique flat but incompatible rail system with other Sinar cameras, also sold as the Zone VI monorail camera in the 1970s.
  • Sinar Handy: 'Point and shoot' 4x5 camera that used a 4x5 P format frame and ground glass back mounted on a handgrip, and used lenses mounted in focusing mounts.
  • Sinar E: P2 that was connected to a computer, which calculated and carried out the movements for the photographer. This camera is very rare and sold at a cost of over US$30,000 in the early 1990s. Also E-shutters and E-shutter lenses, below.
  • Sinar m: modular digital hand-held, auto-focus multi-format: medium format and 35 mm format camera (taking Zeiss or Hasselblad lenses in medium format, or Nikon lenses in 35 mm format), also adaptable to the Sinar P3 medium format view camera.
  • Sinar Hy6: auto-focus, hybrid (film & digital), multi-format (6x6 and 6x4.5) camera, developed between Sinar and Franke & Heidecke (the company that continued the manufacture of Rollei cameras after Rollei had stopped doing so. Not to be confused with the original company of that name, which later evolved into the Rollei company.). The Hy6 camera and assessories are now produced by DHW Fototechnik GmbH.
  • Sinar-approved Sinaron lenses: made in partnership with Rodenstock, Germany.
  • Sinar camera backs 22, 23(H), 44, 54 (M, MC, H), 75 H, eVolution, eMotion22, 75,86,86H,eXact and live video (LV) options, (H defines it as piezo crystal controlled multishot which also includes the eXact with 1, 4(uninterpolated),4 (double res),and 16 shot exposure modes).
  • Sinar arTec specialist architectural film/digital panoramic camera with tilts also used for interiors and landscapes with 28 mm lens.
  • Sinar P2/3 adaptation for Canon and Nikon digital SLR mounting using sinar CPL lens (also nikon/hasselblad lens).
  • Sinar eShutter system for remote aperture/shutter control, focus/sharpness zone determination, and exposure metering and calculation.[11]
  • Sinar RePro system for overhead/copystand operation.
  • Sinar CTM system (Color To Match) multispectral dual-pass filter solution for accurate color reproduction. Technical correspondence to the visible spectrum in the range of 390 – 700 nanometers in collaboration with Rochester Institute of Technology (RIT), Rochester, USA.

Gallery[edit]

  • Viewing through a Sinar F camera.

  • Sinar P (4×5')

  • Sinar DCS465

  • The 33 MP Sinar eVolution 75 medium format digital back

  • Sinar Hy6

References[edit]

  1. ^http://www.sinar.ch/de/downloads/category/22-sinar-pressemitteilungen?download=118%3Asinar-photography-ag-acquires-the-brand-rights-of-sinar-ag
  2. ^'Archived copy'. Archived from the original on 2011-11-29. Retrieved 2011-12-01.CS1 maint: archived copy as title (link)
  3. ^'Leica Camera AG takes over Sinar Photography AG, the Swiss manufacturer of view cameras'. Leica Camera AG. November 26, 2013. Retrieved December 5, 2016.
  4. ^'Archived copy'. Archived from the original on 2012-04-20. Retrieved 2011-12-01.CS1 maint: archived copy as title (link)
  5. ^'Sinar F1 and F2 Comparison'. Large Format Photography Info. Bruce Clarke. Retrieved 21 January 2015.
  6. ^'Sinar F1 and F2 Comparison'. Large Format Photography Info. Bruce Clarke. Retrieved 21 January 2015.
  7. ^'Sinar Instruction Manual'(PDF). Sinar. Retrieved 21 January 2015.
  8. ^'Sinar Instruction Manual'(PDF). Sinar. Retrieved 21 January 2015.
  9. ^'Sinar F3'(PDF). Matrix CZ. Sinar. Archived from the original(PDF) on 8 May 2007. Retrieved 21 January 2015.
  10. ^'Archived copy'. Archived from the original on 2011-11-13. Retrieved 2011-10-17.CS1 maint: archived copy as title (link)
  11. ^http://downloads.image2output.com/Sinar%20Catalogue_2015.pdf

External links[edit]

Wikimedia Commons has media related to Sinar cameras.

Sinar X View Camera

  • Pascal's Rolleiflex Pages Information on the Rolleiflex 6008 AF, Rolleiflex/Sinar Hy6, and Leaf AFi camera systems.
  • Sinar Spare Parts Catalogues Manuals of parts and adjustments for Sinar large format cameras.
  • [1] Current production of HY6 camera

View Camera History

Retrieved from 'https://en.wikipedia.org/w/index.php?title=Sinar&oldid=986513507'